Finally!  Our harness allows you to SAFELY run 55 watt bulbs in your Hondaline and Show Chome driving lights.  The weak point in these bikes is the wiring run by Honda in the main wiring harness; they used one single 18 gauge wire.  That was enough for two 35 watt bulbs....barely.  Our harness has a 14 gauge wire from the battery into our relay.  From there we split out with 16 gauge wires to the light housings.

Installation is a snap!  Unplug the foglights from the bike.  Connect our harness to the one of the plugs on the bike where the foglights used to be connected.  Then connect our harness to both light housings.  Lastly, connect the power wire to the battery.  DONE!

We use genuine Sumitomo OEM connectors (same as Honda).  Made in the USA with quality Consolidated brand wire (made in the USA as well).

As a bonus, you will be able to run the light on BOTH high and low beam if you select. Another bonus; this harness will eliminate damage to the switch as our kit removes all the load from it.  A replacement switch is as much (or more) than this harness!

Kits are available that include quality German H3 55 watt bulbs at a discount over buying them separately.  Bulbs are available in standard Halogen, Xenon (pure white), and Ion (amber).  Pair included in kits.

note; in some cases you may have to slightly modify the the metal base on the replacement bulbs.



Fitment: 2001+ Honda GL1800