|
Power Plate
We designed the Power Plate to allow simple and easy installation
of electrical components - it allows for future growth too. Each unit has 6
individually fused outputs and the entire unit is rated for 30 amps. The Plate is
relay controlled (the relay is easily replaced) - it turns all accessories on and off with
the ignition. The main power into the relay is fused for additional protection.
Installation of a Power Plate helps to keep extra ring terminals off the battery -
if you have had this problem, you know the value of having only one ring terminal to
connect.
We include a port for connecting a battery charger.
The connection to the charger is automatically disconnected if the key is turned on - very
important as a battery charger can go up to 17 volts and the bikes electrical system
cannot handle this high voltage level (serious damage can occur to sensitive computers,
relays or even your charger).
Three models are currently available: Universal, GL1500 or GL1800.
Looking for a way to easily and neatly
attach your ground wires?
Click here for more information
on the Master Ground Block.
All kits include 6 spade connectors, 30 amp main fuse,
quick-connector, instructions and a legend decal to be placed near the Plate to indicate
fuse function.
|
|
  |
|
|
Honda GL1500 |
shown installed
on GL1500 |
Honda GL1800 |
Universal |
legend decal |
(click on thumbnails for larger image)
| p/n 02202 |
Universal model.
Has feet on both
ends for installation.
Dimensions - 4 5/8"L, 2 3/8"W,
1 1/4"H. |
$44.95 |
|
| p/n 02201 |
Honda GL1500.
Does not hide water
levels.
Fits behind battery bar and easily swings out of the way for
battery maintenance. |
$49.95 |
|
| p/n 02206 |
Honda GL1800.
Mounts under battery
side side-cover. Does not interfere with covers. |
$49.95 |
|
| 
