>products  |  >ordering  |  >dealers  |  >search  |  >reference ~ links

 

>us: about  |  >us: contact  |  >warranty ~ general info  |  >cart ~ √-out


Audio
 Amplifiers


We have been involved in car audio in one way or another since 1985.  Beginner, installer, competitor, etc.  Through these years, we have spent more money than we care to think about finding out what works, what does not, and how to overcome the most basic problems.  What we offer here is based on experience and hands on installations.  Be sure to check out the entire line of accessories below to make your installation complete.

Our amplifier kits take the guess work out of adding an amp to your motorcycle's audio system.  We have hand selected the components in our kits for performance, size and quality.  Since we know what you are going to need when you take the bike apart, you will find that virtually everything is included in your kit - until this cloning thing is perfected, you won't find an installer in the box however.

This is an all IC Chip amplifier - lower power consumption, smaller chassis, and less heat build up.  Marine design has a coated PC board to protect against moisture, humidity and dirt/dust.  Available in either 2 or 4 channel models, these amps have both high level (speaker) and low level (RCA) inputs, gold plated connectors, soft turn-on circuit, thermal and overload protection.  Use the 4 channel amp for installs where you will powering 4 speakers. 

NOTE:  Our amps are NEVER "B" stock, refurbished or Grey Market (non-US warranty).  Only US warranty, first line items.

Included with each amplifier (a total value of $63.85 if purchased separately):
    - Installation kit ($24.95 retail value)
        -
power wire with integrated fuse holder, ground wire and turn-on wire
        -
connector kit (nylon connectors when available)
    - US made ground loop isolating
noise filter ($18.95 retail value)
    - US made 4 conductor, double insulated input / output wire for installation ($19.95 retail value)
    - Complete, tested installation instructions.
    - EC's technical assistance.  Been there, done that and we can help.

>Click here for accessories to make your amplifier installation easier and complete.



Fitment: Universal

County of Origin: 

Components:  wire; ,  connectors; ,

Product Support: >Installation Instructions (4 channel)


Note: product may vary in appearance from photo.


2 Channel Amp Specifications
subject to change without notice
 
4 Channel Amp Specifications
subject to change without notice
18 watt x 2 @ 4 ohm RMS 60 watt x 4 @ 4 ohm RMS
60 watt x 2 @ ohm Peak 100 watt x 4 @ 4 ohm Peak
THD: <0.05% THD: <0.05%
S/N Ratio: >95db S/N Ratio: >95db
Freq Response: 15Hz-30KHz Freq Response: 15Hz-30KHz
9" x 2" x 5" 9" x 2" x 7"

Install Kit - Connectors, wiring, fuses, ground loop isolator Sample of Installation Wire

p/n 03202  2 Channel Audio Amplifier Kit.  $89.95

p/n 03201  4 Channel Audio Amplifier Kit.  $109.95